this lofting schedule is basically us planning how we should develop our loft of the boats in the best way. first we start pulling off the dimensions for the boat from the drawing in autocad and then we are able to begin drawing in all of the gridlines (buttocks, water lines, center line). the most important thing in this step is to make sure all of the gridlines are completely square because otherwise it will through off the entire drawing, then the boat.
« why im in new zealand | Main | Lines Plan: profile, half breadth, body plan »
08/17/2010
lofting schedule
Comments
The comments to this entry are closed.
Search
Recent Comments
- clovegro on stem section detail
- maoriboi on Transom Details
- Vickel Narayan on stem section detail
- clovegro on new age of learning
- clovegro on lofting schedule
- clovegro on Lines Plan: profile, half breadth, body plan
- clovegro on stem
- Vickel Narayan on oilstone box and the lasting effects
- Yvonne on lines plan and a bit about lofting
- Wei Shi on why im in new zealand
Chris, Good Blog. This shows me that you have a good understanding of the process. Can you show me how your Table of Offsets was composed?Perhaps with the aid if a few sketches here might help. You will need to edit the blog.
Cheers
Posted by: clovegro | 08/20/2010 at 08:24 AM